A welding inspector in Pakistan typically earns about PKR 55,000–87,000 a month. The same role in Saudi Arabia, the UAE or Qatar averages roughly PKR 520,000–570,000 a month on self-reported survey data, about 7 times higher. Real job ads for newer inspectors often pay far less, and pay depends heavily on certification (CSWIP 3.1, AWS CWI) and experience.
How Much Does a Welding Inspector Earn in Pakistan?
A welding inspector checks that welds meet a code or specification, and signs off the paperwork. They do not weld. They inspect, test and report.
In Pakistan, ERI’s salary survey puts the average at PKR 891,855 a year, within a range of PKR 667,999 to PKR 1,047,930. That is roughly PKR 74,000 a month on average, with a typical range of PKR 55,700–87,300 a month (our division).
Location matters a little. ERI reports PKR 948,683 a year in Lahore, about PKR 79,000 a month.
A Pakistani training provider, IITS, says local oil and gas inspectors can earn PKR 60,000–100,000 or more per month. That claim has no stated source, so treat it as a rough guide.
Two more reference points help:
- Welders (not inspectors): Payscale lists a median of about PKR 354,000 a year.
- Quality inspectors (a related role): Paylab says 80% earn between PKR 31,414 and PKR 86,962 a month.
How Much Does a Welding Inspector Earn in Saudi Arabia, UAE and Qatar?

The figures below come from Naukrigulf, a Gulf job site. They are self-reported, and sample sizes differ by country.
Saudi Arabia
Naukrigulf reports a range of SAR 2,500 to SAR 14,000 with an average of SAR 7,676 a month, based on 155 reported salaries.
That is about PKR 568,000 a month.
Note: another version of the same page shows an average of SAR 8,283. Gulf salary pages change over time, so always check the date on any figure you rely on.
United Arab Emirates
The UAE range is AED 2,000 to AED 14,000, with an average of AED 6,870 a month (27 salaries).
That is about PKR 520,000 a month.
Qatar
Qatar’s welding inspector average is QAR 6,964 a month, based on only 11 salaries, with a range of QAR 2,800 to QAR 14,814. The sample is small, so use it as a guide, not a promise.
That is about PKR 532,000 a month.
Side-by-Side Comparison in PKR
| Country | Avg monthly (local) | Approx. PKR/month | Typical range (PKR/month) |
| Pakistan | PKR 74,300 | 74,300 | 55,700–87,300 |
| Saudi Arabia | SAR 7,676 | ~568,000 | ~185,000–1,036,000 |
| UAE | AED 6,870 | ~520,000 | ~151,000–1,060,000 |
| Qatar | QAR 6,964 | ~532,000 | ~214,000–1,133,000 |
Conversions are our own arithmetic on the sourced figures above. Gulf ranges are the full reported low-to-high spread, not a typical band.
Which country pays most? On these averages, Saudi Arabia leads slightly. The gap between countries (about 8%) is small compared with the gap between your pay and your experience level. Choose a country for the employer and project, not the average.
Welding Inspector Salary by Experience Level
Experience moves the number more than geography.
| Experience | Saudi Arabia (SAR) | Saudi (approx. PKR) | UAE (AED) | UAE (approx. PKR) |
| Entry (under about 6 yrs) | 4,886 | ~362,000 | 3,722 | ~282,000 |
| Mid-career (6–12 yrs) | 7,824 | ~579,000 | 6,972 | ~528,000 |
| Experienced (12+ yrs) | 9,529 | ~705,000 | 9,000 | ~681,000 |
Qatar’s inspector page does not publish experience bands. Its senior welding inspector average is QAR 15,777 (about PKR 1.2 million), but it rests on just four salaries.
What this means for you: an entry-level inspector in the UAE earns about 3.8 times the Pakistani average. A senior one can earn 9 times or more.
Why Job Ads Pay Less (or More) Than Survey Averages
Survey averages blend everyone together. Job ads show what employers actually offer for a specific role.
We found three Saudi examples:
- A Dammam ad listed basic pay of SAR 3,000–4,000, about PKR 222,000–296,000.
- An Aramco CBT-approved inspector role in Jubail (5–10 years) offered SAR 4,500–5,000, about PKR 333,000–370,000.
- A senior QC inspector role (8–15 years, CWI) offered SAR 13,000–16,500, about PKR 962,000–1,221,000.
The gap between the first and last is more than four times. Same country, same job family.
One UAE ad offered AED 18,000–22,000 including allowances, but for a project based in Iraq/China. We treat it as an outlier, not a norm.
Also check for pay listed as annual instead of monthly. One job-board listing showed SAR 200,000–300,000, which is a yearly figure.
What Is Included in a Gulf Salary?
Always ask whether a quoted figure is basic pay or gross pay. Gross includes allowances.
A Lincoln Electric advert in Saudi Arabia (a trainer role, not an inspector role) shows how one package can be built: a base of SAR 17,000, plus housing SAR 4,250, transport SAR 500 and flight SAR 500, for a gross of SAR 22,250 a month. It is only a structural example, but it shows allowances can add about a quarter to basic pay.
Before you accept an offer, confirm in writing:
- Basic salary and each allowance
- Housing, transport and medical cover
- Flights home and how often
- Contract length and overtime rules
Job titles also change the number. “Welding inspector”, “QC welding inspector”, “QA/QC welding inspector” and “senior welding inspector” are priced differently. Naukrigulf’s Saudi QC welding inspector average is higher than its general inspector average (SAR 8,812 vs 7,676), while its senior welding inspector page shows SAR 9,472.
Which Certifications Raise Your Pay?
Certification is the gate, not just a bonus. Many Gulf ads will not consider you without one.
Common requirements in the ads we reviewed:
- CSWIP 3.1 (TWI) or AWS CWI, listed as mandatory in most Saudi inspector ads
- Aramco approval (an SAP number plus a passed CBT) for Aramco-linked projects
- NDT credentials such as ASNT or ISO 9712 Level II (VT, PT, MT, UT), often preferred
| Certificate | What it signals | Notes |
| CSWIP 3.1 | Welding Inspector (Level 2) | Renewal: CV assessment at 5 years, exam at 10 years |
| AWS CWI | Certified Welding Inspector (US scheme) | Often accepted alongside CSWIP |
| Aramco CBT/SAP | Approval for Aramco work | Needed for specific employers |
| ISO 9712 / ASNT Level II | NDT competence | Adds range, often “preferred” |
Is it worth the cost? A CSWIP 3.1 course in Saudi Arabia costs about SAR 7,000 (about PKR 518,000), close to one month of the Saudi average inspector salary. If certification moves you from “not hired” to an Aramco-approved role at SAR 4,500–5,000 a month, it can repay itself in a few months.
current CSWIP 3.1 and AWS CWI course and exam fees in Pakistan. One local provider lists its inspector course at PKR 40,000–70,000, but we could not confirm whether that covers the CSWIP exam.
How Do You Get a Gulf Welding Inspector Job From Pakistan?
- Get certified first. Start with CSWIP 3.1 or AWS CWI and add NDT if you can.
- Build documented experience. Most ads ask for 5 or more years of inspection experience.
- Prepare your CV around codes. List ASME Section IX, AWS D1.1, API 1104 and the types of welding and piping you have inspected.
- Apply through a legal route. Check government job listings at beoe.gov.pk and use licensed overseas employment promoters.
- Read the offer carefully. Confirm salary, allowances and contract length in writing.
- Verify before you pay. Never pay a recruiter to “guarantee” a visa.
The Bureau of Emigration and Overseas Employment (BEOE) lists foreign jobs. One Saudi listing we found (10 QC welding inspectors) shows SAR 3,500–4,500 in its title. We could not open the page, so confirm details directly.
The Gulf Pay Multiple A Simple Way to Compare Offers
The Gulf Pay Multiple (GPM) is your Gulf monthly pay, converted to PKR, divided by your current Pakistan monthly pay.
It turns confusing currency numbers into one plain ratio.
Worked example using the Pakistan average of about PKR 74,300:
- Saudi average (SAR 7,676 ≈ PKR 568,000): GPM ≈ 7.6
- UAE average (AED 6,870 ≈ PKR 520,000): GPM ≈ 7.0
- Qatar average (QAR 6,964 ≈ PKR 532,000): GPM ≈ 7.2
- Saudi newer-inspector ad (SAR 3,000–4,000): GPM ≈ 3.0–4.0
- Saudi senior ad (SAR 13,000–16,500): GPM ≈ 13–16
How to use it: If your offer’s GPM is under about 3, ask whether housing and flights are included. The ratio ignores living costs, so it is a starting point, not a verdict. Your own situation (family, rent, remittances) decides what “worth it” means.
Conclusion
Pakistan is a good place to build experience, but the Gulf countries pay far better. Saudi Arabia and Qatar offer the strongest packages for senior inspectors on large oil, gas and construction projects, while the UAE offers a balance of good pay and lifestyle. Whichever country you choose, international certifications like CSWIP 3.1/3.2 or AWS CWI will have the biggest impact on your salary.
FAQs
What is the salary of a welding inspector in Pakistan per month?
ERI’s survey average is about PKR 74,000 a month, with a typical range of PKR 55,700–87,300. Local oil and gas roles may pay more.
How much does a welding inspector earn in Saudi Arabia?
Naukrigulf reports an average of SAR 7,676 a month (about PKR 568,000), within a range of SAR 2,500–14,000. Entry-level inspectors average about SAR 4,886.
Which Gulf country pays welding inspectors the most?
Saudi Arabia leads slightly on survey averages, but the gap with the UAE and Qatar is small. Experience, certification and employer matter more than country.
How much does a welding inspector earn in Qatar?
The average is about QAR 6,964 a month (roughly PKR 532,000), based on 11 reported salaries. Senior inspectors reported much higher figures, but from a tiny sample.
Do I need CSWIP or AWS CWI to work in the Gulf?
In the ads we reviewed, yes. CSWIP 3.1 or AWS CWI was listed as mandatory for most inspector roles, and Aramco projects also need an SAP number with a passed CBT.
Is a welding inspector paid more than a welder?
Yes. Pakistani survey data shows welders around PKR 354,000 a year (Payscale median) against about PKR 891,855 for weld inspectors (ERI).
Can Pakistani welding inspectors get jobs in the UAE?
Yes. UAE employers hire inspectors with international certification. Check each posting’s requirements and always use legitimate recruitment channels.
[…] get a welding inspector job in Saudi Arabia from Pakistan, you usually need a diploma or degree, several years of inspection experience, and a recognized […]